One of our community members from Taiwanese group Shang-Feng Chiang posts his result of printed out a water bear (tardigrade) model with 0.03mm layer height using his Phrozen Sonic Mighty 8K, which comes out as a great result. The 0.03mm setting combine with the 8K resolution of his Mighty 8K, preserves the detail of the textures on the model's surfaces. This 10cm models took him 12 hours to print, due to his rather conservative plate moving setting. The resin he's using is from a local workshop here in Taiwan, which is not available around the globe. According to Chiang, this resin has similar characteristic compared to the Phrozen Aqua Gray 8K resin, but more watery which explained the higher exposure time. I would recommend people who would like to try this 0.03mm layer height setting with Phrozen Aqua 8K series resin, to simply replace the exposure time for both normal layers and bottom layers with the exposure time that has been...