Un-named Blog Powered by Phrozen

One of our community members from Taiwanese group Shang-Feng Chiang posts his result of printed out a water bear (tardigrade) model with 0.03mm layer height using his Phrozen Sonic Mighty 8K, which comes out as a great result.      The 0.03mm setting combine with the 8K resolution of his Mighty 8K, preserves the detail of the textures on the model's surfaces. This 10cm models took him 12 hours to print, due to his rather  conservative plate moving setting.     The resin he's using is from a local workshop here in Taiwan, which is not available around the globe. According to Chiang, this resin has similar characteristic compared to the Phrozen Aqua Gray 8K resin, but more watery which explained the higher exposure time.     I would recommend people who would like to try this 0.03mm layer height setting with Phrozen Aqua 8K series resin, to simply replace the exposure time for both normal layers and bottom layers with the exposure time that has been...

In the world of resin 3D printing, there is an ongoing debate about whether it is better to print directly on the build plate or use supports. This topic recently sparked a lively discussion in our Facebook group and subreddit, with members sharing their experiences, preferences, and concerns. In this article, we will delve into the different perspectives presented in the conversation and explore the pros and cons of printing directly on the build plate.  ▲ Sometimes people need to print stuff directly on the build plate for various reason. Credit. The Importance of Model Orientation:      One key point is that, the ideal orientation for printing a model is not always the one allowed by printing flat on the bed. Depending on the complexity and geometry of the model, it may be more efficient to use supports to achieve the desired outcome. This is particularly true when dealing with intricate designs or models with overhangs. ▲ Proper orientation and good supports can ...

Last time, we've introduced a stray dog named Peachy, which had her fortune to have one of the volunteer Wong, from the local stray rescue and adoption group in Hualian, Taiwan, to made a 3D printed prosthetic for her congenital amputation, who is also a member of Phrozen's Taiwanese group on Facebook.     After 3 months, Peachy has become 6 months old and has already adopt to the prosthetic Wong has made for her. And she has also become heavier, more stronger then before, which means Wong have to adjust the design of the tailored prosthetic to better fit her current state.      Wong has also tried out some new material making the prosthetic. Despite other kinds of resin has stronger, more durable result compared to the Phrozen Rock-Black Stiff he's originally used, Rock-Black for its easy to print, high dimensional accuracy, is still the choice for him to do the fast proto...

One of the biggest trend in Phrozen community this year is Aqua 8K Gray + Onyx Impact Plus resin mixture. Since people found out that mix a bit of Impact Plus into the community favoured Aqua 8K resin, can provide the model with exceptionally great durability while maintain the detail achieved by the Aqua 8K, it has become many people's go-to resin mixture for printing tabletop miniatures.      Brian Gordon in Phrozen 3D Printer Group on Facebook opened up a thread talking about his experiment with 60% Aqua 8K Gray + 40% Onyx Impact Plus mix, and having one of the user, Luther, who is known for advocating this ratio of resin mixture joined the discussion, sharing their settings with other members in the community. ▲ The result from Brian's setting that uses calculation of exposure time applied by the ratio as a starting point which works right away for him.      Brian explains that he calculates the exposure time using the average exposure time of each resi...

 I was having a conversation with one of the group experts in our community, Ondrej Novotný, talking about the overall using experience of resin 3D printing, and the difficulties that people often run into.       Being an experienced 3D printing user himself, he understands that  beginners may find it a bit challenging at the outset, and able to provide some advices that can help them to improve their 3D printing skill, without scurry aimlessly. My advice to beginners is to take their time, follow best practices, and seek advice from the 3D printing community. With patience and persistence, their experience with resin 3D printing is likely to improve over time. 1. Read the Manual:       Start by thoroughly reading the user manual and documentation that comes with your resin 3D printer. Understand its specifications, capabilities, and safety guidelines. 2. Slicing Software:       Familiarize yourself with ...

 Steven Palk has shared his print of a sculpture of Iceman with the community of Phrozen Sonic Mighty Seris Users Group on Facebook, using High Transparent Resin from NOVA3D with Phrozen Sonic Mighty 8K upgraded with the 12K Upgrade Kit and ACF film, which comes out with an outstanding result.     Here is his result and settings. For those who is trying to print High Transparent Resin from NOVA3D with 12K upgraded Sonic Mighty should give it a try. ▲ Steven's Iceman sculpture printing result. Model designed by Wicked. ▲ Steven's printing settings. Printer: Sonic Mighty 8K with 12K Upgrade Kit installed Resin: NOVA3D High Transparent Resin Releasing Film: ACF Layer Height: 0.05 mm Bottom Layer Count: 6 Normal Layer Exposure Time : 10 s Bottom Layer Exposure Time : 30 s Transition Layer Count: 6 Transition Type: Linear Transition Time Decrement: 2.86 s* Waiting Mode During Printing: Resting Time Rest Time Before Lift: 0 s Rest Time After Lift: 0.01 s Rest Time After Re...

 The quality of surfaces of resin 3D  prints varies as it is affected by lots of factors, one of them is the model orientation when preparing the model. Orienting the model, especially for those which has sudden increase or decrease area of cross section, can increase the quality of the model's surface, by minimize the difference between those area of cross sections. This way can also help stabilize the plate-shaped model, spreading out the forces from a single direction to the whole model, decreasing the chance of deformation. ▲ Layer line is a common thing happened on resin 3D prints. This surface annoying many people who pursuit details and perfection. /Evaty Yu     The common way is to orienting the model by 45 degree and see if the result is satisfactory. Sometimes it did work but just doesn't quite there. In this stage most people will simply do the post processing and sand the surface to eliminate those imperfections, but some people would rather adjust and ex...